Holy S**T!

Yea...Awesome story here. haha


Ok! So, yesterday around 5 i went to meet Mike from bB Squad to pick up some spacers from him. (Also, i forgot my cam, so no real pics...haha) Anyway, my 1 1/2" or 38mm spacers.



Ok so this is where the fun starts, and i have no pics. haha. So i went to the mall and chilled till Ryan got home, then i went to his place to install the spacers. So we do one side, its bad. Its sitting on the tire, looks perfectly flush...for someone on air. haha. so i stuck the metal bar from the jack in there and pulled it a little, and pulled it with my hands as well. Then i took a lap around his neighborhood and it was rubbing REALLY bad, so i pulled it even more, made the dent worse. But the rubbing stopped. So we did the other side, and it just needed a little pull with my hands. haha. Ok, so I figured I'm all good. So we start drivin to the meet, and im rubbing the whole way there, but i dont care the music is up i dont hear it. haha i can smell it tho...It was bad. By the time i got to the meet, which was a 10 min drive, my door was covered in rubber, my tire was close to exploding, the paint was bubbling from the heat, like a bubble bigger then a quarter. haha. The smell was horrible, and wow it was just baaaaaad. haha So anyway i wasnt about to leave it and drive home like that because i knew i couldnt make it. So i started pullin on it with my hands, then Adam came over with his tool bag and i started messin with things.

Casey took these pics when we just started. Thanks dood.





So then i got tired and agravated and walked away, Todd and some people asked if they could help, and before i knew it there was a crowd around my car and Todd was goin to town with some vice grips. haha. So i came back to fender rapeage...But whatever it made enough clearence to get home.

Ok it gets worse from there. HA! Im drivin home. The drivers side still rubs, but just bearly. Thanks Todd. haha. But the passenger side is BAD! So im in the canyon like half way home, and i decide to pull over. While im lookin fer a somewhat level place to go off the road i hit a chunk of asphult and bust my lip, again. Lmao. So i pull over and pull the shit outta my fender on the side of the road, which almost makes my side skirt fall off. So at that point i wasnt happy with my decisions or the car. but whatever.

So when i got off work today I decided to see what i could do to make em better, because i have 2 plans with em. Either get new ones. Or make custom mini flares, with what i have, just smoothe it out.

Here it is before i worked on it at all.























Tire rapage, and why i didnt wanna drive home with that continuing.



This is the main part im worried about fixing since its torn.



The lip. Its time for more zipties



The other side. Not nearly as bad because Todd wasnt touching it :P




Tire got messed up tho



Then it was time to get to work. And this was the first tool i wanted to use. hahaha



Then they looked like this













Then i busted out my favorite tool.



The Roll-O-Matic 300!



Doin work.



Then busted out my new hammer and dollie set.



Starting smashing it, trying to knock out some of the dents, and straighten some of the metal.



My awesome spacers that caused all this. haha




This is how it sits tonight. I'll take the fender off and work on it some more when i have more time.













Did a little work on the passenger side, mainly to flaten the sharp edge that was cuttin into my tire. haha









I love the way these 2 pics came out, Even tho there like the same. haha. Oh and i raised the car like half inch too. well the front. But imma prolly go another half inch, at least while im workin on the fender and such, i dont wanna rub really bad, on these horrible tires, or mess up the fender anymore.




Thanks for reading! Goodnight! :D

100th Post!!! All about my car too!

Alright so we made it to 100 posts! YAY MEE! Hahah. Anyway, Its time to step up this blog, keep it current, and going. So from here on out expect some more awesomeness. haha.

Alright so its been a while since i've shown anyone an update of my car, so here we go. Starting from where I left off.

First here's a dope song to listen to while u read my ramblings



Back to the car! Picking up where I last left off. I sold the sportmax, bought the BBS RA, sent the off to polishing, and I rode around like this fer about 2-3 weeks.



Then I got the RA's back July 10th. HUGE thanks to Indy, and his uncle fer helpin me out and gettin these done and lookin awesome. Some pics from that night.




I like this pic. haha



After that I got the tires mounted, went to throw em on, and ran into some problems. the fronts went on alright. But the rears, the center of the wheel, idk what to call it, but the wheel it self is too thick. So the stock studs wouldnt clear, and I couldnt get a lug nut on them. Which kinda dissapointed me, because I was soo excited to see my new wheels on the car, and lookin good. Plus this was a day before i was driving like 300 miles fer a week long camping trip, so I really needed the new tires. (the ones on the steelies were beyond bald) ha. Anyway so I put the fronts on, and have been rollin like this fer about a week.




Really like this picture. Ohh, also, because im sure you'll notice, I buckeled the fender...Again. :facepalm: Hahaha. I was pulling it so it would like up with the bumper, and SNAP that happened. Oh well its not tooooo bad.




This shot would be awesome with a fish eye lense. haha



Saturday night, I ordered these, so I can finally mount the rear wheels



So those should be here tomorrow, or wednesday. Also, I'm picking up some 38mm (1 1/2") spacers wednesday, so I can ditch the hella sunken look up front. From there I'll pick up what ever size hub spacers i need to fill the rear fenders, and make it look decent with the front. haha. Well thats it for now. More pics to come, when I get everything together.

Thanks to all my readers (if there are any) fer getting me to 100 posts!

Immmmm Baaaaaaack!

Hahaha. Long time no talk! Anyway my computer died a while back, and i just finally got everything sorted out. Anyway I have a lot of catching up to do. So i'll start with one of the projects i've been working on for a while. Thats Codey's car' I worked on it fer like 2-3 weeks, and he took it home like 2 weeks ago, when everyone came up for tech day. haha. anyway i'll let the pics to the talkin :D

Took some stuff apart was about ready to start workin. haha



Then busted out the hood, and started on the fender.






a few days past and i got a little further.




then found some bondo



Then a lot of time passed, and I called a friend over and we got some real work done. haha



Steven doin work





Then the day ended with a car lookin like this




Steven came back fer more work a few days later, and we kicked some ass on the car. haha






somewhere in here i started on the roof




And finished the roof




And this is pretty much how he took it home. never got to finish the drivers side. but still got a lot done. Lol. Sorry bout that Codey' i felt bad fer not finishing it up fer ya.